Python module for binary_c Based on a original work by Jeff Andrews, updated and extended for Python3 by Robert Izzard >>> THIS CODE IS VERY EXPERIMENTAL AND PROBABLY WILL NOT WORK <<< r.izzard@surrey.ac.uk http://personal.ph.surrey.ac.uk/~ri0005/binary_c.html 09/06/2019 ------------------------------------------------------------ --------------------- Environment variables --------------------- Before compilation you should set the following environment variables: required: BINARY_C should point to the root directory of your binary_c installation recommended: LD_LIBRARY_PATH should include $BINARY_C/src and whatever directories are required to run binary_c (e.g. locations of libgsl, libmemoize, librinterpolate, etc.) recommended: LIBRARY_PATH should include whatever directories are required to build binary_c (e.g. locations of libgsl, libmemoize, librinterpolate, etc.) --------------------- Build instructions --------------------- To build the module, make sure you have built binary_c (with "make" in the binar_c root directory), its shared library (with "make libbinary_c.so" in the binary_c root directory), and set environment variables as described above, then run: --- make clean make --- then to test the Python module --- python3 ./python_API_test.py --- You will require whatever libraries with which binary_c was compiled, as well as the compiler with which Python was built (usually gcc, which is easily installed on most systems). ------------------------------------------------------------